ACCURL

New Servo Hybrid Press Brake EuroMaster

ACCURL created the top level EuroMaster with high-end specifications and execution with advanced motion technologies and impressively quiet with the integration of advanced safety equipment and options.

With EuroMaster you can make even the biggest structures with the highest speed and versatility. Choose and configure your press brake high-quality press brakes for the more demanding taste.

Key features:

• Increased working speeds, stroke, daylight and back gauge speeds.
• Reduction of energy consumption up to 65%.
• Lowered sound pressure level at 50 dB.
• CNC control
  • DELEM DA66T/DA69T or VisiTouch 19 2D/3D
• CNC back gauge
  • BGA-6 for X1,X2/R1,R2/Z1,Z2-axis back gauge
• Upper tool fastening
  • WILA hydraulic clamping
• Lower tool holder
  • WILA hydraulic & WILA Crowning
• Front supports
  • On linear guides or CNC controlled front workpiece supports
• Wide range of auxiliary equipment
  • Angle measurement device
  • Workpiece handling
• Super technology from LAZER SAFE
  • Bending Angle Measurement System IRIS PLUS
  • Wireless Foot Pedal
  • SmartLink Brackets
• INDUSTRY 4.0 READY
  • Connection to company LAN and ERP
  • Interface to other machine tools
  • Remote assistance and diagnostics

ACCURL® EURO-PRO Series CNC press brake with a high-quality build, an impressive number of features and options, competitive pricing and advanced DELEM DA66T 3D capable graphical controls, this is your first choice in Y1/Y2 machine technology.

ACCURL® New Genius Plus Series based on the proven design Pro Series, has increased working speeds, stroke, daylight and pressing capacities, with advanced motion technologies and is impressively quiet with the most flexible features and options. The Genius model is the ultimate in creating complex parts.

Key features:

• DELEM DA-66T CNC control unit with 2D graphics
• Increased speed of descent and ascent to over 200 mm/s.
• Increased performance up to 30 % by reducing the cycle time
• Lowered sound pressure level at 60 dB.
• Standard BGA-4 for X, R ,Z1 ,Z2-axis ( X=800mm,R=200mm)
• Reduced noise development in all operating modes
• Less quantity of hydraulic oil required.
• Large open height
• Large stroke
• Large throat depth

The Genius Hybrid Press Brake with ePrAX Servo System, with improved energy efficiency of up to 65% compared to conventional hydraulic systems, is an innovative servo drive for CNC press brakes, and thanks to the ePrAX Hybrid Servo System, we can precisely control the movement of the slider ram using a minimum amount of oil and energy.

Key features:

• High dynamic for a higher productivity of the machine.
• DELEM DA-69T CNC control unit with 3D graphics
• Increased speed of descent and ascent to over 220 mm/s.
• Reduction of energy consumption up to 65%
• Lowered sound pressure level at 45 dB.
• Standard BGA-6 for X1, X2 , R1 , R2 ,Z1 ,Z2-axis ( X=800mm,R=200mm)
• Servo-motor, with closed loop speed control
• Sheet metal frontal supports
• Front and rear lighting
  
• Industry 4.0 of Productivity Monitor (software version V3.5.3)

The eB-Electric Press Brake from ACCURL features the advantages of high acceleration, deceleration and extremely fast response time of the ball screw servo drive system.

ACCURL Tandem CNC Press brake equipped with CE Lazer Safe LZS-XL tandem adapter, enables you to switch between working in Tandem or single mode at any time. All working modes satisfy the strictest CE standard.